paddock stand ?

[zend]

An alternative is to buy something like the Spool-Sliders halfway down this page:

Yamaha FZ-07 Frame Sliders

I have them mounted on my FZ-07.

R&G sells an equivalent product in Europe:

Yamaha MT-07 '14- Spindle Sliders SS0042BK

 

[zend]

Also wanted to add that this Pit Bull stand (also available directly from Pit Bull) has swappable supports and works with spooled and unspooled bikes. I've used this stand with the OES spools on the FZ-07 - works great. Haven't tried it on the FZ-07 with swing arm supports but it should work fine. A very pricey option but will last forever. Not sure what the Euro equivalent is.

Pit Bull SS Rear Stand - RevZilla

 

[Antony_Mavromichalis]

I have this installed Yamaha MT-07 Rear Spindle Bobbins | Honda Bike Parts

And with a paddock stand that works with both bobbins and fork mount .

 

[Koray]

I bought Oxford Big Black Rear Stand today. And i guess its pretty good. Stand is quality, i can also adjust chain tension, easy to clean chain. Robbers are strong enough. Im thinking to buy a front 1 as well.
In the manuel it says 2 men lift but its very easy with 1 man done it at first try.

View attachment 733View attachment 734View attachment 736View attachment 735

 

[Tommeke]

Since I don't have any good surface to put on a paddock stand. I bought myself one of these.View attachment 1623

It works fine. A stand is easier to put your bike on.
This is cheapier. 25€ @ bs motopartsView attachment 1624
View attachment 1626

 

[Noggie]

I've got pretty much the same a s Koray has, seems to do the job quite well.

 

[Hammerian]

The best paddock stand i have found so far is this one...

Motorbike Dolly Mover DS Yamaha MT-07 Rear Paddock Stand | eBay

[video=youtube;_4IXoykDyhU]https://www.youtube.com/watch?feature=player_embedded&v=_4IXoykDyhU[/video]

Its outstanding, doubles up as a dolly also so the whole bike is completely maneuverable. I bought one and its made from good quality parts and does what it says on the tin so to speak really good.

Make sure you watch the video on their site, lovely bit of kit.

Regards

Ham

 

[Yaminator]

You guys that use the spools the through the rear axle spindle, How do you undo and tighten the nut after chain adjustment..??

 

[gregjet]

Anders,
I see two mufflers on the TDM. Is it actually 2 into 2 separate like it should be on a 90(270) degree twin or 2-1-2. Maybe we could persuade miiv to make a proper one. I would sell my Akro. Snail if there was one available. Or better still maybe I can try GPR as they seem to be willing to do things right.

 

[Deleted member 20]

TDM900 pipes are just linked together with a pipe just before splitting left/right to each muffler.

 

[Noggie]

hi and30ers , sorry I could not see your photos , when I opened the link it said content currently unavailable . Norway sounds like a really great place to visit , I read once , I think , that there is a road that goes around the top above the arctic circle and onto Finland , that sounds very appealing !!!!!!!!!!!!

There are many many crazy roads in Norway.
close to where I live there is a place called "Lysefjorden", this place has a winding road going up the mountains.
the elevation is 1000meters

https://www.youtube.com/watch?v=ATSRbW-H7gY

This longer video is going to the hairpins, a road worthy of its own video.

https://www.youtube.com/watch?v=sD0QCpOBYo8

I plan to drive this road this summer as it is only 2 hours from my house.

 

[Hammerian]

Just edited my post on the previous page to show a video of the stand i bought... Its outstanding..

take a look..

[video=youtube;_4IXoykDyhU]https://www.youtube.com/watch?feature=player_embedded&v=_4IXoykDyhU[/video]

Regards

Ham