qual
0
well its fixed !!!
any guesses on what it was ??
heres a clue
_ _ _ _ _
any guesses on what it was ??
heres a clue
_ _ _ _ _
-
Welcome to the Yamaha MT-09 / FZ-09 Forums. Member registration disables ads and allows you to post and share. Register Here.
Glad it's fixed, but I need a bit more of a clue than that!
maybe Speed
qual
0
Slime
Went for a new set of tyres and as soon as he took the wheel off he said i know what the problem is , was an obvious one i guess but didnt come to mind because i didnt know Terry had put in in there,
So new roadtec 01 fitted and its smooth as at ALL speeds now ....
Went for a new set of tyres and as soon as he took the wheel off he said i know what the problem is , was an obvious one i guess but didnt come to mind because i didnt know Terry had put in in there,
So new roadtec 01 fitted and its smooth as at ALL speeds now ....
So my mechanic was right as he has found out the cause at the front tyre...
It will be nice if we could learn more about..
Interesting. I've used Slime in a couple of bikes - both front and back wheels - to cure slow punctures, and never had a problem.
It does make things easier when you finally come to take the old tyre off, though - it's a bit like having built-in tyre-fitting gel!
It does make things easier when you finally come to take the old tyre off, though - it's a bit like having built-in tyre-fitting gel!
Had this with several bikes, not the Tracer though. A change of front tyre has always cured it. I seem to remember Bridgestone and Contis being the worst culprits. They were also the tyres I suffered the worst scalloping on the tread edges, perhaps it's the same cause? I know it's not helpful but I only had the problem when letting go of the bars so the answer is not to let go!