set

Added a Daytime running light to the forks to fill the black spot in front at night and a set of Aliexpress LED lights for width to High Beam at night.

can anyone help i have followed instructions on how to reset co2 settings on my bike i have held down both buttons switched on ingnition and waited but alas nothing do i need to set mode to std and traction control to 1 or 2 or do i have a fault with the diplay

O.K. finally finished and fitted my modified stock exhaust system, thread with pics to follow soon. And today I added a k&n filter and set the CO to 14 on each cylinder a guesstimate really to help compensate for a leaner fuel/air mixture with the exhaust and filter, also my bike had previously...

Has anyone removed their passenger footrests? I'm looking for a set if you wish to sell them.

Bike now done over 21000 miles, and the pads are getting low. I have a 2013 non ABS model, and am happy with the braking performance. The OE pads are £33 a set from my dealer, £19 for the EBC similar parts, or Pyramid parts sell the full set, front & rear, for £29 (link below). I will probably...

Hi MT-09 gurus! Can anyone help me? Just got my new MT-09 a little over a week ago and I came here looking for recommended suspension settings. I'm probably about 200 lbs with all my gear on and I ride mostly canyon roads--some very smooth sections and some really bad concrete sections where...

If you've got a set of standard bars in good nick I'd be interested. Many thanks!

I've looked in the settings and profile for setting the date format shown on threads. I see MM-DD-YYYY , but would like to set this to DD-MM-YYYY , is there an option?

Hi all its time for a new rear tyre after 3500 miles. Not sure what way to go, should i buy just a rear Bridgestone s21 as i still got plenty of life in the front s20 is it ok to mix s20 / s21? Or stop being a tight arse and buy a set of PR4s or somthing else. I am commuting through London...

Hi all ,I recently sold my 2008 650 versys after 8 years of ownership. Great bike Just got bored with it .Took a test ride on a new MT09 Tracer Impresive bike ,there is however one thing putting me of purchasing, when I did a slight tug of the bars at about 70mph It induced a very slight weave...

Hello fellow MT-aniacs, had mine for a year now, love it, the rawness of it's power, the roar of it's Akrapovic from tick over to 137mph, it keeps this old bugga as happy as his two stroke teenage days. Has taken me on some long European trips and many a Sunday blast. Now needing a service and...

HI all, new to this forum, pick my new toy up in a couple of days, new tracer :cool: was riding sports bikes for aprox 15 years, but now im getting on a bit :) tourer/adventure bikes the way forward now. will probably be asking for lots of advice regarding changing parts and set up etc...

Has anyone changed theirs? I'm not going to spend upwards of £160 to £180 for these so open to pointers. I've seen a nice set on eBay item number 111895660763. Any comments would be appreciated. Steve

hi all.only been riding 12 months and i have had two sets of the standard battleaxe now and to be fair i have had no problems at all with them.( apart from a bit of squaring but im getting there:p) been looking at rosso 2's for my next set. anyone rate them or have any other suggestions. i am...

thought just show great set up with kriega tail bags.

Hello Does anyone know where I can get a set of the black rubber frame plugs to suit the mt09??

Have managed to get the shad side cases inc brakets for under £300 all new just a case of shopping about So all set up for touring this summer

I am looking for a set of Moto cage hand guards. I am about to buy the Moto cage fly screen as its the only one that looks acceptable for the front a in my opinion, but would like some hand guards to match, I will be painting the screen and hand guards to match my bike just missing a set of...

Installed the 2005 ZX10R shock, standard MT spring set at stock max preload length, 1.5 turns out from minimum reb and comp, rear end excellent, compliant and controlled $200 NZD mod inc Suzuki Bolt kit. The front end was a bit dearer to sort but still happy. Managed to secure another R/H...

Hey all, I'm looking for some replacement bar-end weights that are threaded, but also allow bar end mirrors to be used. Rhinomoto in the US make a perfect set, and they will ship to the UK, but once you factor in import duty and shipping, they become quite pricey. I bought a set of universal...