I've just adjusted the chain on my tracer only to find on the sprocket end of the spindle turns against the block marking it and also tightening the chain as it spins,I've got round it by holding the sprocket end with an adjustable spanner while my daughter tightened the nut which I've done to 110 nm as when I undo the nut it was no were near 150 nm,anyone else had similar problem? Have Yamaha changed the tensioner blocks under warranty?.
-
Welcome to the Yamaha MT-09 / FZ-09 Forums. Member registration disables ads and allows you to post and share. Register Here.
Tracer chain adjuster blocks
Done! pm coming ....
LewFZ1
0
You could have had a warranty claim, I did .
So did I...!
That are made of cheese..!
I then decided to put the Giles Racing Adjusters on instead.
That are made of cheese..!
I then decided to put the Giles Racing Adjusters on instead.
Triple trouble are your Gilles adjusters the ones on eBay for around £80 from cal sport ? It would be great if you had some pics of them fitted,I've also seen the r&g ones for around £55.cheers.
Yes from calsport. Bought them about 2 years ago though lol.
Message sent
Shaun yes buy the Gilles ones that Cranky is selling. They're the ones I have and are spot on.
Gilles are the Yamaha official accessory items. They're £70 odd from Yamaha - mine came as a freebie on the bike.
Cheers chump,I've just looked on eBay and calsport have red ones for £65 and my bikes red,I've just emailed them to see if the mt09 and tracer use the same adjuster.
The adjuster blocks on the MT-09 and Tracer are the same part numbers, so you should be fine.
LewFZ1
0
Maybe made of cheese, but I have adjusted my chain a couple of times now and as long as you take your time no problem. The original ones were knackered by the previous owner.