tube

did a search but can find what im after,The throttle tube on the 2014 mt09 is 38MM diameter. As anyone swapped the throttle tube over form another Yamaha model to get a reduced turn. Seen some one using R6 tube on the MT07. I have seen active do a qat with a 44mm diameter tube but dont want to...

Just thought I'd share with you all the method I used to pull the baffle out, after trying all the suggestions I found on line apart from removing the silencer all together none worked for me. Looking around my garage for ideas I thought I'd try an internal bearing puller. I bought a kit on my...

Had a spare half hour , so bit the bullet n cut the pipe , had to cut the original hanger off and using a temp hanger , a steel tube joiner , it's nearly done , if all works out OK on the road , I'll get a stainless tube on there and weld it up to remove the temp joiner n clamps

Anyone got one of these? What's are your opinions of them? Cheers Tony

Has anyone looked into remapping the ECU? i've seen a few bits on you tube but i dont know much about the gains . i;d be interested to know if anyone has had it done

As you probably know I've put ohlins springs in my forks !!! My question is, I'm using the cable tie method to see how much travel I'm using. Is the bottom of the chrome tube the actual suspension bottom point or is it a few mm upwards (or more) The tie is currently around 15mm from the bottom...

Ahoy! I was intent on installing the Arrow dark alum and mounting it shortie style on my FZ-07, and I approached a fuel controller and exhaust vendor about this. His reply was interesting and I haven't seen much on here or other forums with regards to the performance aspects of mounting the...

Hello I got my fz this week. I am thinking about swapping the handle bar. I have 3 handle bars at home from my XS11. One is the drag bar with raisers. Looks like it could be a good one for the fz07. I also have a cafe racer bar. Has anyone changed the handle bar. I am also thinking about...