Search results

Finally, Ohlins fork cartridges fitted with 9nm springs and Ohlins fork oil added, done a test ride Saturday, all seems ok, it felt better than the original cartridges but this is only a settling-in period, next will be a re-check, and set up to my riding style so hopefully, weather permitting a...

Finally...going for the full Ohlins cartridge/springs upgrade, will now be able to experience the difference

Standard suspension?

Has anyone here had the Ohlins NIX30 fork internals fitted and as it cured the so called 'KNOCK' when the forks compress ?

I have the Ohlins rear shock with remote adjusted and swapped Metzler roadtec 01's for Michelin road 5 which for me as made the handling even better

Hi Ballon Thx for the reply. Due to the fork rebuild i now have K Tech uprated fork springs with Ohlins 7.5 grade oil, just done a 170 mile run out on the bike to get things settled back in, will give it a few more long runs for the forks to be fully bedding in then recheck their setup

Hi all As anyone put different forks onto a Tracer, not the internals but completely different forks. the reason for the asking was recently I had a low-speed front end collision and couldn't believe I bent not only the inner tubes but also the stantions as well, I compared the Tracers forks to...

If the frame is damaged then the economic cost would probably be cast as a right off. I had a low-speed collision into the back of a delivery van, the insurance classed it as a non economical repair due to the headlight on its own is nearly £1000, got the bike back and now fully repaired

Don't the original bar ends unscrew using an Allen key to remove them then remove the insert if it as them?

Any chance of putting the instructions onto this site for us to see

A new problem has now arisen. It appears I can only get oil flow via Boost, not normal even on max flow and full sensitivity. I think this more of a problem with the program screen device rather than the oil reservoir, anyone else had this problem with the E system ?. Awaiting for a reply from...

No bike shops near you in which the new tracer is in stock for you to look at in the flesh ?

I take it you had a good look at the diagrams on MSP website for the parts that are required

Excellent, go for it and enjoy

Metzeler M7RR, are these more dry orientated than all weather riding ?

I've finally changed my Metzeler Roadtec 01's to Michelin PR5's, for me there is a difference between both makes with the Michelins being a lot better, i think the Michelins appear to work better with my upgraded suspension as well with cornering speed. Many thanks for all the replies

Have you contacted Pro Bolt concerning this issue?

Hi all I will soon be looking at new tyres but not sure which ones to choose ?. I am considering either Michelin PR5 or Dunlop RS3, at the moment i have Metzeler RoadTec 01. From what I understand the Michelins are like the Metzeler, soft and comfortable where the Dunlops are hard but give a...

I take it you fitted the MT09 exhaust and not the Tracer exhaust ?

It appears on the website the DB killer is not a separate part of the main exhaust body